FREE EU Shipping
60 Day Ride & Return Period
Please don't miss out, order now. Our frames are in high demand due to their unique specifications. Please be aware that we are working hard to meet demand. Unfortunately sales often outstrip supply, so please order now to avoid disappointment.
When we launched the 161, many riders loved the Enduro World Series race-focused concept, but we know not everyone has access to world-class steep and technical alpine trails. We listened, and here it is, the 141.
Built to handle everything from your local trail loop to park laps, or even a local Enduro race or two. Taking our proven platform and stretching out the seated position slightly gives riders more room to enjoy those undulating sections of trail.
The 141 is ready to ease you to the top with it’s steep climbing position, whilst it’s progressive geo will let you focus on the next chute, tight switch back or fun side hit on the way back down.
Who said versatility has to be boring?
Comes as standard with Fox's Updated DPX2 designed for the latest hard-hitting enduro and trail bikes, featuring the ride tuning abilities of an air spring with both compression and rebound adjustment allowing riders to easily dial in a podium-worthy ride.
- Entirely new base valve design and a valved circuit in open mode raises the already high bar for trail performance
- X2 small bump sensitivity meets DPS lightweight and simplicity
- One-piece EVOL air sleeve improves responsiveness and sensitivity
- Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression
|Wheel size||(P1) 27.5" (P2-4) 29”|
|Max Tyre size||27.5"/29”x2.6|
|Headset Upper Cup||ZS44|
|Headset Lower Cup||ZS56|
|Suspension fork travel||150mm|
|Fork Offset||(P1) 37mm (P2-P4) 42/44mm|
|Rear Shock Size||205x57.5. Custom Fox Tune|
|Upper shock mount||Trunnion|
|Lower shock mount||8x30mm|
|Bearings||4x6900-2RS, 4x6800-2RS & 5x6002-2RS|
|Max Post Insertion||P1 - 230mm
P2 - 250mm
P3 - 280mm
P4 - 300mm
|Bottom Bracket||73mm Threaded|
|Max chainring size||Boost/3mm offset 34 tooth|
|Chainline||52mm. Minimum 168mm Q-Factor|
|Rear rotor mount||Direct 180mm Post Mount|
|Rear Spacing||Boost 148mm|
|Axle Size||178mm x M12*P1.5. Thread length 12.5mm|
|Approx Frame Weight||
P1 - 3.7kg/8.15lbs* (Without shock, axle, etc.)
|Torque Specs||Upper Shock mount - 10 Nm
Lower Shock Mount - 8 Nm
Upper Main Pivot - 12 Nm
Lower Main Pivot - 12 Nm
Seatstay/Rocker Pivot - 10 Nm
Dropout Pivot - 10 Nm
The frame is designed to run great either a coil or air shock.
Does it fit a water bottle?
Yes! We'd recommend up to a 500ml bottle in a side load cage
Can I set the bike up mullet? (29" Front and 27.5" Rear?)
No, we do not recommend this set up as it will make the bottom bracket too low and slacken both the head and seat angles.
Can I run Plus Size?
The 141 was not intended to run plus, but can clear a 27.5x2.8 tyre. This will lower the bottom bracket height slightly.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection